Esplora queste idee e molte altre!

When mounting corner blocks to reinforce a frame or case, use a clamp block on the outside to provide a flat surface for secure clamping and to prevent damage to parts. For example, to mount corner blocks on the table shown, make a clamp block with a notch from 3/4"-thick scrap. Then glue and clamp the corner block in place. Now drill the mounting holes. (We used a combination drill and countersink bit to do this.):

When mounting corner blocks to reinforce a frame or case, use a clamp block on the outside to provide a flat surface for secure clamping and to prevent damage to parts. For example, to mount corner blocks on the table shown, make a clamp block with a notch from 3/4"-thick scrap. Then glue and clamp the corner block in place. Now drill the mounting holes. (We used a combination drill and countersink bit to do this.):

Squaring system:

Squaring system:

Easy to make and easy to use right angle clamps.  More uses than just glueing up.

Easy to make and easy to use right angle clamps. More uses than just glueing up.

farmhouse table

farmhouse table

As the editor in chief at TFH, Ken has acquired a lot of workshop tips. Here are 18 of his best!

As the editor in chief at TFH, Ken has acquired a lot of workshop tips. Here are 18 of his best!

Straight-Up Drill Guide - To bore a perfectly perpendicular hole, you need either a drill press or a couple of scraps of wood screwed together. The corner created by the scraps will steer the bit straight in every time. But if you’re looking for an excuse to buy a drill press, forget you ever saw this tip.

15 Classic Handy Tool Tips and Tricks

Straight-Up Drill Guide - To bore a perfectly perpendicular hole, you need either a drill press or a couple of scraps of wood screwed together. The corner created by the scraps will steer the bit straight in every time. But if you’re looking for an excuse to buy a drill press, forget you ever saw this tip.

Easy picture frame clamp

Easy Picture Frame Clamp

How to use your speed square http://www.familyhandyman.com/tools/how-to-use-a-speed-square/view-all

How to Use a Speed Square

How to use your speed square http://www.familyhandyman.com/tools/how-to-use-a-speed-square/view-all

12ft --- normally you’d be on the same side as the rope, for easier lifting

Working Alone with Plywood

12ft --- normally you’d be on the same side as the rope, for easier lifting

Neue Werkstatt produced this incredibly adaptable, minimalist bed in a small joinery by hand. The wood craft of the NW2 bed is simple yet accomplished and it’s plug-in frame ensures assemblage is effortless. Because of it’s small frame the bed is also very easy to transport!

Neue Werkstatt produced this incredibly adaptable, minimalist bed in a small joinery by hand. The wood craft of the NW2 bed is simple yet accomplished and it’s plug-in frame ensures assemblage is effortless. Because of it’s small frame the bed is also very easy to transport!

Pinterest
Cerca